Cutting is clearly one of the vital substantial procedure in clothing manufacturing. Here clothing portions are chopping in reaction to the pattern. In clothing chopping branch, a procedure flow chart should maintained to send the very good measurement portions in the next procedure for making fine clothing.
Figure 1- Cutting part
Machine used in chopping part:
Straight knife chopping mechanical device.
Cloth grill m/c ( used to signal in for your complete lay so they cant go effortlessly. It is used on the marker, outside the pattern region are further about cloth is burned by reason of use of this m/c)
Auto layer chopping m/c
Band knife chopping m/c
Auto seal m/c ( used for numbering objective )
Pistol Sticker signal in for m/c ( used also numbering objective where automobile seal m/c isn't workable )
Tools used in chopping part:
Clump
Fabric roll stand
Scale, pencil, complicated paper and so on.
Process flow chart of chopping part:
Figure 2- Working procedure flow of chopping branch
You may smartly additionally even comply with: Working Process of Cutting Room in Apparel Industry
Working procedure of chopping part
Marker Receives from The Pattern and CAD Department: Cutting part first receive marker from the Pattern and CAD branch. According to marker cloth lay is reduce by the chopping master.
Cutting ratio obtained from Concern authority: Here chopping In-Charge receive chopping ratio from the concern authority or merchandiser, or manufacturing manager.
Fabric gets from store: Cutting obtained cloth for chopping in reaction to chopping ration good cloth pre-requisition.
Fabric mammoth measure: Before chopping cloth mammoth is measure to make explicit cloth is extra than marker width.
Fabric Spreading: After cloth measure, cloth is all set for spreading and growing cloth lay.
Marker placing on the lay: After growing lay, marker is put on the lay for chopping.
Cutting: Here chopping master reduce fabrics lay in reaction to marker.
Numbering: Here Cutting panel are numbered by reason of keep far from colour alterations.
Bundling: As per the manufacturing line requirement a explicit form of pieces with all aspect are tied collectively. This procedure is referred to as bundling. Each bundle is marked with bundle stove, vogue identify, size stove and amount of pieces in that bundle.
Cut panel inspection: In this stage, a hundred% reduce panel inspected by the inspector here, mainly study weaving faults figured out or now not on the reduce panel.
Replace faulty part: If figured out any weaving faults on the reduce panel, substitute reduce panel robotically from colour matching fabrics.
Send to the sewing Line: In this stage, reduce panel send to stitching part in reaction to bundling.
Factors thought of all through marker making:
Nature of the Fabric: The cloth may smartly additionally be either symmetric or asymmetric. Thus the nature of the cloth deserve to be thought of all through marker making.
Lay planning of patterns: Improper lay planning of patterns may smartly additionally create extra wastage. Thus it deserve to be taken beneath consideration.
You may smartly additionally even comply with: Marker Making Methods in Apparel Industry
Advertisement